intel processor diagnostic tool portable

I've also tried two different brand new RAM modules as well as another PSU (650w this time, which should be more than plenty). It also wouldn't make much sense since I did that in the past and replaced the entire motherboard. The system crashed again as soon as I exited the BIOS menu, so that wasn't the issue. Still, I followed your suggestions, cleared the CMOS and made sure the BIOS settings are all default. I tried my hand at that a few months ago (tweaked some things, ran XMP and OC Genie) but decided I didn't need the performance boost and noticed some frame skips in some applications. I have a 750w PSU running my i5 7600k and gtx 1060. For your current setup I would recommend a PSU with more than 550w of power. If the system was overclocked this will revert everything back to stock, But you'll be able to rule out stability issues. Enter BIOS, if you can, and select 'Load Optimized Defaults ' and reboot PC. Clear CMOS, if you do not complete steps 1 and 2, the cmos may not completely clear. Hold power button for 30 seconds to discharge any remaining power, wait 5 then hold another 30.ģ. Unplug absolutely every cable (usb and monitor).Ģ.

Is your PC overclocked or running at stock speeds? Try the following steps.ġ. It is very rare that a cpu becomes fried.

Intel processor diagnostic tool portable